网络世界

If you are using LSI SAS 2008 based HBA/RAID cards such as the LSI 9211-8i FreeNAS recommend run in IT (Initiator Target) mode. Don’t use cards in IR (Integrated RAID) mode. For update  firmware and BIOS check current firmware ver

1.sas2flash/sas3flash

1.1.sas2flash for LSI SAS 6 Gb/sec HBAs (Windows/Linux/EFI)

1.1.1.Cannot be used to flash to older firmware

1.1.2.Cannot be used to flash from IT to IR firmware or from IR to IT firmware

1.1.3.Can be used to flash the controller BIOS and/or EFI

2.sas2flsh for LSI SAS 6 Gb/sec HBAs (DOS)

2.1.Can be used to flash to older firmware

2.2.Can be used to flash from IT to IR firmware or from IR to IT firmware

3.sas3flash for LSI SAS 12 Gb/sec HBAs (Windows/Linux/EFI)

3.1.Cannot be used to flash to older firmware

3.2.Cannot be used to flash from IT to IR firmware or from IR to IT firmware

3.3.Can be used to flash the controller BIOS and/or EFI

4.sas3flsh for LSI SAS 12 Gb/sec HBAs (DOS)

4.1.Can be used to flash to older firmware

4.2.Can be used to flash from IT to IR firmware or from IR to IT firmware

OEM version of the LSI SAS 9211-8i, such as the Dell H200, H310 or IBM M1015 are quite popular for use with FreeNAS. However, they need to be flashed with a regular LSI firmware to disable their RAID capabilities in order to passthrough the dri

Default firmware for this guide is:2118it.binVersion 20.00.07.00Release date: 11-FEB-16WARNING: If you have an Integrated, Mini or Mini Mono Perc H310 do NOT try to crossflash with these steps.So this guide will be the update to my first guide… witho

I just wanted to go through a few things I found while trying to flash IT firmware to my Dell Perc H310. This process is pretty well documented on various sites and forums for users that have an older motherboard with a typical BIOS. For users like m

There are many way to create a bootable USB drive. Not every method will suite your needs depending on what you’re trying to do. Chances are if you’re trying to copy a Windows DVD to a USB then the Windows 7 USB/DVD Download Tool should be all