网络世界

书山有路勤为径,学海无涯苦作舟!

IBM ServeRAID M1015 : Cross flashing to a LSI9211-8i in IT or IR mode

IBM ServeRAID M1015One of the most popular SAS 6.0gbps/ SATA III controllers for enthusiasts is the IBM M1015. In its native form, it is a very capable host bus adapter (HBA) based on the LSI SAS2008 chip. With the low price on places such as ebay (s

How to flash a LSI SAS 3008 HBA (e.g. IBM M1215) to IT mode

IBM M1215 LSI SAS3008 HBA If you are looking to get a new host bus adapter (HBA) the LSI SAS3008 controller is perhaps the most popular 12gbps SAS controller on the market. It supports features such as the LSI DataBolt which

LSI 9210-8i HBA Card Flash To IT Mode

If you are using LSI SAS 2008 based HBA/RAID cards such as the LSI 9211-8i FreeNAS recommend run in IT (Initiator Target) mode. Don’t use cards in IR (Integrated RAID) mode. For update  firmware and BIOS check current firmware ver

Flashing firmware and BIOS on LSI SAS HBAs

1.sas2flash/sas3flash

1.1.sas2flash for LSI SAS 6 Gb/sec HBAs (Windows/Linux/EFI)

1.1.1.Cannot be used to flash to older firmware

1.1.2.Cannot be used to flash from IT to IR firmware or from IR to IT firmware

1.1.3.Can be used to flash the controller BIOS and/or EFI

2.sas2flsh for LSI SAS 6 Gb/sec HBAs (DOS)

2.1.Can be used to flash to older firmware

2.2.Can be used to flash from IT to IR firmware or from IR to IT firmware

3.sas3flash for LSI SAS 12 Gb/sec HBAs (Windows/Linux/EFI)

3.1.Cannot be used to flash to older firmware

3.2.Cannot be used to flash from IT to IR firmware or from IR to IT firmware

3.3.Can be used to flash the controller BIOS and/or EFI

4.sas3flsh for LSI SAS 12 Gb/sec HBAs (DOS)

4.1.Can be used to flash to older firmware

4.2.Can be used to flash from IT to IR firmware or from IR to IT firmware

Firmware Intel Integrated RAID Module RMS25JB080 in IT mode

This small article may be useful for owners of the RMS25JB080 module or for administrators who are looking for a good solution for building inexpensive disk storages. Prehistory There was a need to work out a budget and reliab

Convert LSI 9211-8i HBA card to IT mode

Revised 2 February 2017. Its critical for data integrity that the LSI HBA cards run in IT (Initiator Target) mode with the correct firmware revision matched to your FreeNAS software. It is possible to pay some vendors to perform the co

DELL H200 Flash to IT firmware - Procedure for DELL servers

Prerequisites: -1) a) move your H200 card from storage slot to another PCI-E slot; b) get longer cables from DELL to connect the backplane to the H200; c) verify the system is still working well.

Crossflashing Dell PERC H200 to LSI 9211-8i

OEM version of the LSI SAS 9211-8i, such as the Dell H200, H310 or IBM M1015 are quite popular for use with FreeNAS. However, they need to be flashed with a regular LSI firmware to disable their RAID capabilities in order to passthrough the dri

Revert your Perc H310 back to it’s Dell firmware

A lot of people have asked me how to revert the Perc H310 back to it’s original state.You’ll need the newer zip file I’ve created with all the necessary files. LSI 9211-8i zip file.Here are the steps:If you have more than one card installed you can i

Updated: SAS HBA crossflashing or flashing to IT mode, Dell Perc H200 and H310

Default firmware for this guide is:2118it.binVersion 20.00.07.00Release date: 11-FEB-16WARNING: If you have an Integrated, Mini or Mini Mono Perc H310 do NOT try to crossflash with these steps.So this guide will be the update to my first guide… witho
<< 1 2 > >>
«   2020年4月   »
12345
6789101112
13141516171819
20212223242526
27282930
控制面板
您好,欢迎到访网站!
  查看权限
网站分类
内容搜索
最新留言
    文章归档
    网站收藏
    友情链接
    • Z-BlogPHP
    • 订阅本站的 RSS 2.0 新闻聚合

    Powered By Z-BlogPHP 1.7.0

    Copyright © 2020 Onekey.Run Rights Reserved. | 本站原创内容采用 CC-BY 4.0 协议授权,网络转载收集作品权利属于原作者。