IBM ServeRAID M1015 : Cross flashing to a LSI9211-8i in IT or IR mode
IBM ServeRAID M1015One of the most popular SAS 6.0gbps/ SATA III controllers for enthusiasts is the...
How to flash a LSI SAS 3008 HBA (e.g. IBM M1215) to IT mode
IBM M1215 LSI SAS3008 HBA If you are looking to get a new host bus adapter...
LSI 9210-8i HBA Card Flash To IT Mode
If you are using LSI SAS 2008 based HBA/RAID cards such as the LSI 9211-8i FreeNAS recommend r...
Flashing firmware and BIOS on LSI SAS HBAs
1.sas2flash/sas3flash 1.1.sas2flash for LSI SAS 6 Gb/sec HBAs (Windows/Linux/EFI)...
Firmware Intel Integrated RAID Module RMS25JB080 in IT mode
This small article may be useful for owners of the RMS25JB080 module or for administrators who...
Convert LSI 9211-8i HBA card to IT mode
Revised 2 February 2017. Its critical for data integrity that the LSI HBA cards run i...
DELL H200 Flash to IT firmware - Procedure for DELL servers
Prerequisites: -1) a) move your H200 card from storage slot to another PCI-E...
Crossflashing Dell PERC H200 to LSI 9211-8i
OEM version of the LSI SAS 9211-8i, such as the Dell H200, H310 or IBM M1015 are quite popular...
Revert your Perc H310 back to it’s Dell firmware
A lot of people have asked me how to revert the Perc H310 back to it’s original state.You’ll need th...
Updated: SAS HBA crossflashing or flashing to IT mode, Dell Perc H200 and H310
Default firmware for this guide is:2118it.binVersion 20.00.07.00Release date: 11-FEB-16WARNING: If y...